CRETAPlastYour project · Estimator ESBack

CONTRACT
PLASTIC
INJECTION
MOLDING.

We injection mold plastic parts for companies across Mexico, with your mold or with one we manage for you. Our plant is in Naucalpan, State of Mexico, with machines from 60 to 280 tons.

Do you already have a mold?

Choose where your project stands and we’ll show you what we do at each stage.

  1. 01

    Development

    We define the part with you and review it for manufacturability.

    No mold
  2. 02

    Mold management

    We coordinate its manufacture with domestic and international moldmakers.

    No mold
  3. 03

    Mold review

    We check size, weight, runner and water connections, and assign the machine.

  4. 04

    Setup

    We mount the mold on the right machine.

  5. 05

    Validation

    We produce samples and fine-tune the process with you.

  6. 06

    Production

    We mass-produce with process control.

  7. 07

    Finishes and packaging

    Rework, labeling, assembly and packaging.

  8. 08

    Delivery

    Parcel service or an outside freight carrier, or pickup at the plant.

With your mold, we start at the review. Check below whether it fits our machines ↓

What’s included

Production with your mold

If you already have a mold, we review it, mount it on the right machine and produce your parts.

Mold development and management

If you don’t have a mold yet, we coordinate its manufacture with domestic and international moldmakers and handle the technical follow-up.

Process validation

We fine-tune and validate the process before mass production.

Finishes, assembly and packaging

We deliver the part ready to use: with rework, labeling, assembly and packaging as you need.

Larger projects

If your part exceeds our installed capacity, we evaluate producing it at one of our partner plants, managed by CRETAPlast.

Does your mold fit?

60–280 tof clamping force. Specialists in small parts and short runs.

Adjust your mold’s dimensions and we’ll tell you which machines it fits.

Your mold fits from the 60 t machine up.

For guidance only: it compares the mold size with each machine’s mold space. The final machine also depends on clamping force, projected area, cavities and part weight.

Who supplies the material?

In contract molding, you can supply the resin or we can source it. Set up your case and see where the material goes inside the plant.

Material

Light and flexible; widely used in caps and containers.

Color

You provide

    We do

      The amount of material for process startup and adjustment is defined in the quote.

      After molding

      The part can go straight from the machine to packaging or go through other processes first. Choose one to see it.

      Gets the part ready to use or for the next process.

      • Deflashing and cleaningManual removal of runners and flash.
      • Flame treatingPrepares the surface for printing or bonding, softens sharp edges and removes very light flash. PP and PE usually need it before printing.
      • Air blowingCleaning with compressed air: dust, chips and residue.

      Processes are quoted for your part. You can calculate them in the estimator.

      Industries we serve

      Where we are

      Naucalpan, State of Mexico

      Gustavo Baz 333, Ex Hacienda de Cristo, Naucalpan de Juárez. We border Mexico City.

      View on Google Maps ↗︎

      Serving all of Mexico

      We serve customers in Mexico City, the State of Mexico and the rest of the country. We ship by parcel service or an outside freight carrier, or you pick up at the plant.

      Frequently asked questions

      Can I bring my own mold?

      Yes. We review its condition and its data (size, weight, runner system, water connections) to assign it to the right machine.

      Do you make the mold?

      Not at our plant. We coordinate and manage its manufacture with outside moldmakers, and we take care of the technical follow-up.

      Can I supply the material myself?

      Yes. In that case we quote the production and, if applicable, the assembly and packaging.

      How much does contract injection molding cost?

      It depends on the part, the material, the mold and the volume. The online estimator gives you a preliminary breakdown in minutes; then we turn it into a formal quote.

      Do you have certifications?

      Our plant has no certifications and no clean room. If your project requires a certification or clean-room manufacturing, we evaluate its production at one of our partner plants, managed by CRETAPlast.

      Do you serve customers outside the State of Mexico?

      Yes. We serve customers across Mexico. We ship by parcel service or an outside freight carrier, or you can pick up at the plant.

      Where is the plant?

      At Gustavo Baz 333, Ex Hacienda de Cristo, Naucalpan, State of Mexico, bordering Mexico City.

      Related

      Online estimator

      Try your project in our estimator.

      It’s free and runs on CRETA OS engines: the same ones we use to review geometry, size the mold, assign the machine and estimate the cost of our projects.

      You can start without an account. With your account you save the estimate, download the sheet and send it to us for a quote.

      1. 01

        From dimensions or a 3D file

        Start from base shapes with approximate dimensions or upload an STL or STEP file.

      2. 02

        Mold, machine and cost

        You get a preliminary breakdown of mold, material, machine and production.

      3. 03

        Draft check

        With a 3D file, check the draft angles right in the viewer.