CRETAPlastYour project · Estimator ESBack

PLASTIC
INJECTION
MOLDING FOR
APPLIANCES
AND ELEC­TRICAL.

We make plastic housings, accessories and functional components for appliances, electrical equipment and consumer products. We can handle products made of several parts that assemble together.

Plastic solutions for appliances and electrical equipment

Choose what kind of customer you are. We show you what is usually needed and how we solve it.

Schematic illustration.

Appliance or small device brand

Plastic housings and parts for appliances

You make or sell devices and need housings that fit together, look good and assemble without rework.

Housings that fit and look good

In housings, the fit between parts and the visible finish matter. For housings and visible parts we use ABS, and we review the design for manufacturability before defining the mold.

Product development ↗︎

A product made of several parts

We evaluate the complete product, not each part separately, so it can be assembled without rework, and we can deliver it assembled.

Product development ↗︎

Knobs and buttons

We make the knobs, buttons, lids and covers that are part of the device.

Estimate your project ↗︎

Electrical equipment manufacturer

Plastic components for electrical equipment

You make electrical equipment and need functional components, covers and parts that take inserts.

Parts for assembly with inserts

We make parts for assembly with inserts, so your product can be screwed together and assembled.

Estimate your project ↗︎

Transparent or impact-resistant parts

For parts that need impact resistance or transparency we use polycarbonate (PC).

See materials ↗︎

Hinged covers

For functional components and parts with hinges we use polypropylene (PP). The final material is defined by the part’s function and validated before production.

See materials ↗︎

Company with a new product

Development of plastic housings and products

You have a new product and need to take it from idea to parts that can be manufactured and assembled.

From idea to part

We review the design for manufacturability before defining the mold, coordinate the mold build, and you approve the design, the prototypes and the trials.

Product development ↗︎

Starting with low volume

We handle short runs as well as continuous production, and we evaluate it with your volume.

How the estimator works ↗︎

Spare parts and accessories

Plastic spare parts and accessories for devices

You need replacement lids, knobs or accessories for devices already on the market.

Lids, knobs and accessories

We make replacement lids, covers, knobs and accessories. If there is already a mold, we run it; if not, we develop the part with you and coordinate the mold build.

Product development ↗︎

A few parts at a time

We handle short runs and pack to your specification.

Estimate your project ↗︎

Company with existing molds

Contract injection molding with your molds

You already have molds for your parts and are looking for a place to run them.

Running your mold

We review your mold and assign it to the right machine at our plant in Naucalpan, with machines from 60 to 280 t.

See the plant ↗︎

Appliance and electrical parts we make

  • Housings
  • Lids and covers
  • Knobs and buttons
  • Functional components
  • Accessories
  • Parts for assembly with inserts

Not any of these? Tell us about your project and we’ll review it.

Frequently asked questions

Can you make a product made of several parts?

Yes. We evaluate the complete product, not each part separately, and we can deliver it assembled.

What part size can you mold?

It depends on the geometry and the material; our machines range from 60 to 280 tons. See the capacity by tonnage on the plant page.

Other industries

Related

Online estimator

Try your project in our estimator.

It’s free and runs on CRETA OS engines: the same ones we use to review geometry, size the mold, assign the machine and estimate the cost of our projects.

You can start without an account. With your account you save the estimate, download the sheet and send it to us for a quote.

  1. 01

    From dimensions or a 3D file

    Start from base shapes with approximate dimensions or upload an STL or STEP file.

  2. 02

    Mold, machine and cost

    You get a preliminary breakdown of mold, material, machine and production.

  3. 03

    Draft check

    With a 3D file, check the draft angles right in the viewer.