PLASTIC
INJECTION
MOLDING PLANT
IN NAUCALPAN.
CRETAPlast is a plastic injection molding plant in Naucalpan, State of Mexico. We produce parts for companies across Mexico and for our own product lines.
Inside the plant
A tour of the plant’s areas. Tap an area on the layout or in the list to see what happens there. The tour follows the production flow: from material to shipping.
Whole plant
In the same plant we prepare the material, mold, finish the parts and ship them. Choose an area to see what happens there.
- Injection molding machines from 60 to 280 t of clamping force.
- Three shifts, Monday to Saturday: 17 production shifts per week.
- Deliveries across Mexico.
Injection molding
Injection molding machines from 60 to 280 t of clamping force, from small precision parts to large parts.
- We assign the machine based on the mold, the part and the material.
- We run molds with temperature controllers, hot runners and hydraulic actuators.
- We operate three shifts, Monday to Saturday.
Drying and cooling
The equipment that prepares the material and keeps the process temperature stable.
- Material dryers: remove moisture from resins that absorb it before molding.
- Chiller and cooling tower: cool the water that runs through the molds and machines.
Coloring
We color the resin in-house with masterbatch.
- We match the color to a sample part or a Pantone reference.
- We also process resin that arrives pre-colored in its final color.
Granulator
This is where production runners and scrap are ground.
- Regrind goes back into production only if the customer authorizes it.
- If not authorized, it does not go back into their parts.
Molds
We do basic in-plant maintenance on the molds we run.
- Major work, such as remaking cavities or plates, is coordinated with outside shops.
- We don’t build molds: we coordinate their manufacture with moldmakers and handle the technical follow-up.
Finishing
Coming off the machine, parts can go through finishing before packing.
- Deflashing and cleaning, assembly, packaging and labeling.
- Packaging is done to each customer’s specification.
Shipping
We deliver across Mexico.
- We ship by parcel service or an outside freight carrier.
- Or you pick up your order directly at the plant.
Schematic illustration: it does not represent the actual plant layout.
When we produce
Three shifts, Monday to Saturday. There is no production on Saturday night, and some Sundays we can work on special order. Drag the hand or choose a day.
Monday · Morning shift
Production
Capacity by tonnage
Small precision parts: clips, inserts and compact components.
- Shot size
- 200 cm³
- Max. weight (PS)
- 180 g
- Max. mold
- 345 × 345 mm, 430 mm thick
Small everyday parts: small caps, accessories and assembly components.
- Shot size
- 220 cm³
- Max. weight (PS)
- 200 g
- Max. mold
- 385 × 385 mm, 470 mm thick
More parts per cycle: caps, compact housings and small parts in multi-cavity molds.
- Shot size
- 215 cm³
- Max. weight (PS)
- 195 g
- Max. mold
- 410 × 410 mm, 450 mm thick
Medium parts: household accessories, covers and functional components.
- Shot size
- 360 cm³
- Max. weight (PS)
- 330 g
- Max. mold
- 480 × 480 mm, 480 mm thick
Containers and housings for consumer products.
- Shot size
- 320 cm³
- Max. weight (PS)
- 290 g
- Max. mold
- 470 × 470 mm, 520 mm thick
Larger working area: parts with more projected area or more cavities, depending on the mold.
- Shot size
- 495 cm³
- Max. weight (PS)
- 450 g
- Max. mold
- 540 × 460 mm, 500 mm thick
Large parts: container bodies, wide covers and larger assemblies.
- Shot size
- 750 cm³
- Max. weight (PS)
- 690 g
- Max. mold
- 610 × 570 mm, 610 mm thick
Our highest-tonnage machine, for projects that need more clamping force.
- Shot size
- 735 cm³
- Max. weight (PS)
- 670 g
- Max. mold
- 630 × 630 mm, 630 mm thick
Values for guidance. The final selection depends on geometry, material, cavities and the mold. Part weight is validated taking the runner and process margin into account.
Location
Naucalpan, State of Mexico
Our plastic injection molding plant is in Ex Hacienda de Cristo, Naucalpan de Juárez, State of Mexico, bordering Mexico City. The plant runs through the block from Av. Dr. Gustavo Baz to Ejido de la Posta, with an entrance on each street. Choose an entrance to see that side of the building.
Deliveries across Mexico
How does your order reach you? Choose an option to see it on the diagram.
Simplified diagram, not to scale.
Frequently asked questions
Where is the plant?
In Ex Hacienda de Cristo, Naucalpan de Juárez, State of Mexico. The loading and unloading entrance is at Gustavo Baz 333, and the visitor and staff entrance is at Ejido de la Posta 11 A.
Can I pick up my order at the plant?
Yes, by appointment, through the loading and unloading entrance at Gustavo Baz 333.
What tonnage do you handle?
Injection molding machines from 60 to 280 t of clamping force. Each tonnage has its own mold and weight limits; you can see them above.
Do you work on weekends?
On Saturday we produce on the morning and afternoon shifts. There is no production on Saturday night, and some Sundays we can work on special order.
What mold size do you accept?
Up to 630 × 630 mm and 630 mm thick on our 280 t machine. Each tonnage has its own limits; you can see them above.
Can you produce parts that need more than 280 t?
We evaluate producing them at one of our partner plants, managed by CRETAPlast.
Do you make the molds?
Not at our plant. We coordinate their manufacture with moldmakers and handle the technical follow-up. At the plant we do basic maintenance on the molds we run.
Do you have certifications?
Our plant has no certifications and no clean room. If your project requires a certification or clean-room manufacturing, we evaluate its production at one of our partner plants, managed by CRETAPlast.
Do you only do contract molding, or do you also sell your own products?
Both. We manufacture for other companies and for our own product lines: CRETAPack, CRETAHome, CRETAPets and CRETAMed.
Related
Online estimator
Try your project in our estimator.
It’s free and runs on CRETA OS engines: the same ones we use to review geometry, size the mold, assign the machine and estimate the cost of our projects.
You can start without an account. With your account you save the estimate, download the sheet and send it to us for a quote.
- 01
From dimensions or a 3D file
Start from base shapes with approximate dimensions or upload an STL or STEP file.
- 02
Mold, machine and cost
You get a preliminary breakdown of mold, material, machine and production.
- 03
Draft check
With a 3D file, check the draft angles right in the viewer.