CRETAPlastYour project · Estimator ESBack

PLASTIC
PRODUCT
DEVELOP­MENT.

We help you turn an idea into a plastic part ready for injection molding: we define its use, review the design for manufacturing, coordinate the mold and validate the process before mass production.

Where does your project start?

We agree on everything with you before we start: which stages your project has, what you receive at each one and when you approve. Nothing moves forward without your sign-off.

Today you have:

  1. 01 of 08

    Your project

    Before we start, we agree on the scope with you: which stages your project has, what you receive at each one and when you approve.

    You receive: The written scope, with deliverables and approval points.✓ You approve: The scope. That kicks off the project.

  2. 02 of 08

    Design

    We design the part with injection molding in mind from the start.

    You receive: The 3D model of your part.✓ You approve: The design.

  3. 03 of 08

    Engineering

    We review the design for manufacturing with the CRETA OS DFM engine: wall thickness, draft angles, undercuts, material and gate location. See what we review ↓

    You receive: The design review report, with the changes we propose.✓ You approve: The engineering.

  4. 04 of 08

    3D prototype

    Before investing in the mold, you check a physical 3D prototype of your part: shape, size and fit.

    You receive: The prototype.✓ You approve: The prototype.

  5. 05 of 08

    Mold

    We coordinate the mold’s manufacture with domestic and international moldmakers and handle the technical follow-up until production.

    You receive: The formal quote for the mold.

  6. 06 of 08

    Trials

    The first shots are run and the process is adjusted until the part meets what was agreed: dimensions, color and finish.

    You receive: Physical samples of your part.✓ You approve: The trials. With your approval, production starts.

  7. 07 of 08

    Production

    Mass injection molding with process control, on machines from 60 to 280 t. If your part requires a clean room or more capacity, it is evaluated at one of our partner plants, managed by CRETAPlast.

    You receive: Tracking of your order in your account.

  8. 08 of 08

    Delivery

    Assembly and packaging to your specification. We deliver by parcel service, outside freight carrier or at the plant (by appointment).

    You receive: Your production with its inspection report.

What we review in the design

Reviewing the design for manufacturing before building the mold is what saves the most time and money. Choose a point and compare the part before and after.

Schematic illustration: proportions are exaggerated so the changes are visible.

* To validate the manufacturability of each part we rely on CRETA OS, our in-house technology, and its DFM engine. We use it on every project and improve it with what we learn from each one.

Uniform wall thickness

Thick areas take longer to cool than the rest: they sink (sink marks), warp and lengthen the cycle.

Frequently asked questions

Do I need a 3D model to get started?

No. We can start with approximate dimensions and the wall thickness. If you have an STL or STEP file, you can also upload it to the estimator.

Do you make the mold?

Not at our plant. We coordinate its manufacture with domestic and international moldmakers and handle the technical follow-up until production.

What if my design can’t be injection molded as it is?

We tell you before quoting and propose the changes. If injection molding isn’t the best process, the estimator can also point you to another one.

How much does it cost to develop a part?

It depends mainly on the mold and the volume. The online estimator gives you a preliminary breakdown of mold, material and production.

Related

Online estimator

Try your project in our estimator.

It’s free and runs on CRETA OS engines: the same ones we use to review geometry, size the mold, assign the machine and estimate the cost of our projects.

You can start without an account. With your account you save the estimate, download the sheet and send it to us for a quote.

  1. 01

    From dimensions or a 3D file

    Start from base shapes with approximate dimensions or upload an STL or STEP file.

  2. 02

    Mold, machine and cost

    You get a preliminary breakdown of mold, material, machine and production.

  3. 03

    Draft check

    With a 3D file, check the draft angles right in the viewer.